POS Sales Are Not Deducted from Stock
Checks are rung up at the till, but stock in the dashboard does not go down, recipe ingredients are not consumed, or sales show a zero cost price. The cause is almost always a setting of the point, the warehouse or the recipe, not a malfunction. Below is how a sale reaches the warehouse and what to check, in order.
Other names for this problem: "not deducted", "not written off", "stock does not decrease", "sales do not leave the warehouse", "cost price 0", "ingredients are not written off", "stock on the till does not match the warehouse".
How a till sale deducts stock
- When. The till sends a closed (paid) check to the server, and the server conducts it against the warehouse. An open check deducts nothing. A check that has not yet reached the server (for example, the till is working offline) is not deducted either.
- From which warehouse. From the point's warehouse (the Warehouse field of the point card). The exception is an item that has a Printer subdivision whose subdivision has its own Warehouse: such an item is deducted from the subdivision's warehouse. A till (workplace) has no warehouse of its own.
- What exactly. If the item has a recipe (calculation) valid at this point, its ingredients are deducted by the recipe. If there is no recipe, the item itself is deducted. The item type (Goods, Dish, Semi-finished) does not matter here — only whether a recipe exists.
- A service (Service in the Item type block) has no stock: it is not deducted itself. If a service has a recipe, the recipe's ingredients are deducted.
- Consolidated bills. If the point has Use consolidated bills turned on, checks are deducted not one by one but by a common Summary Account document — one per shift.
Check in this order
1. The sales point has a warehouse
POS > Automated Points → point card → Main tab → Warehouse field. If it says "Not specified", this point's checks are not deducted from any warehouse, and the Document conducting tool skips them as well. See Automated Points.
Pick the warehouse and save the card. Checks already rung up are not re-conducted automatically — see step 9.
2. The item does not go to a subdivision warehouse
Open the item in Guides > Items and look at the Printer subdivision field. Then open that subdivision in POS > Printer Subdivisions: if its Warehouse field is filled in, the item is deducted from that warehouse, not from the point's warehouse. Look at the stock of the subdivision's warehouse in that case. See Subdivisions.
3. The checks are conducted
Warehouse > Order/Invoice lists the till checks. Conducted column: "No" means the check was definitely not deducted. "Yes" alone does not prove a deduction: checks of a point without a warehouse (step 1) and checks of a point with consolidated bills are marked the same way — for the latter the shift's Summary Account does the deduction (step 5).
To conduct such checks, open Settings > Document conducting, tick Warehouse documents, set the period Starting from date, choose the operation Conduct unconducted and click Run. If a check cannot be conducted because of insufficient stock, the tool lists it among the errors with the item, the warehouse and the overuse. See Document conducting.
4. The warehouse allows negative stock
Guides > Warehouses → the deduction warehouse → Allow negative stock switch. If it is off and more was sold than the warehouse holds, the check is rejected as a whole when conducted: none of its lines is deducted. With consolidated bills, the whole shift's Summary Account is rejected the same way.
Two ways to fix it: first receive the missing goods (Receipt or Posting), or turn on Allow negative stock on the warehouse. Then conduct the checks as in step 3. See Warehouses.
Blocking the sale on the till itself is a different setting, in the point card; see Automated Points.
5. The shift's Summary Account is conducted (if consolidated bills are on)
The setting: POS > Automated Points → card → Settings tab → General Settings group → Use consolidated bills.
When it is on, the shift's sales are collected into a Summary Account document (Warehouse > Summary Account). While the shift is open, this document may stay unconducted — then the current shift's sales are not yet visible in stock. It is conducted when the shift is closed and when the Stock Balance report is built in the dashboard. If a shift closed long ago and its Summary Account is still not conducted, conduct it with Document conducting (step 3).
6. The dish has a recipe that is valid at this point
Guides > Calculations → the dish's recipe. Ingredients are deducted by the recipe only when all of these hold:
- the Valid from date is earlier than the time of the sale;
- the recipe is linked to the point of sale: the All trade points switch (including new ones) is on, or the point is ticked in the Trade points list. If the account links recipes by warehouse, the deduction warehouse must be ticked in the Warehouses list instead.
Without a matching recipe, the dish itself is deducted — its stock goes negative and the ingredients are left untouched. See Calculations, section on the recipe's scope.
7. The item is not marked as a Service
Guides > Items → item card → Item type block. If Service is ticked, the item has no stock and is not deducted itself. For an item that must be tracked in stock, clear this tick. See Items.
8. Sales cost price is 0
The cost price of a sale is calculated from the item's movements on the deduction warehouse up to the moment of the sale. If there was no conducted receipt to that warehouse before that moment — the goods were not received, were received to a different warehouse, or the receipt is dated later — the cost price is zero.
Check in Analytics and Reports > Warehouse Reports > Goods Movement whether the item was received to the deduction warehouse before the sales. The Goods Movement report for the item and warehouse shows every line: receipts, checks and Summary Accounts.
9. Re-conduct documents after fixing
Fixed settings apply to new sales. Checks that are already conducted stay as they were conducted. The same applies to a back-dated receipt when there were sales after its date.
Open Settings > Document conducting, tick Warehouse documents, choose Starting from date and the date to recalculate from (the receipt date, or the day from which the warehouse or recipe should have applied). Choose the operation Re-conduct and click Run. Documents are re-conducted in date order, so stock and cost price are recalculated with the fixes applied.
A document dated later than it should be
The Stock Balance report counts only documents dated no later than the date it is built for. A document dated in the future does not reach today's stock, and a receipt with a future date gives no cost price to today's sales. Check the date and time in the document header: if it is wrong, unconduct the document, fix the date and conduct it again.
Stock on the till does not match the dashboard
The POS V2 till shows not the live server stock but a snapshot of it: it downloads stock from the server and subtracts what is already in its own checks but not yet deducted on the server. The snapshot is refreshed when the order screen opens and after a check is paid (no more than once every 90 seconds), on the Stock on hand screen, and with the Refresh stock button in the not-enough-stock window. Offline, the till shows the last snapshot it received.
A mismatch that does not go away after a refresh usually means one of these:
- you are looking at a different warehouse in the dashboard — the till shows the stock of the warehouses its point deducts from (steps 1 and 2);
- the point has no warehouse: the till shows the stock of the account's first (main) warehouse, while sales are not deducted from any warehouse (step 1);
- with consolidated bills, the open shift's sales are not yet conducted in the dashboard (step 5).
FAQ
Why does Sales Analysis show fewer sales than Sales Analytics?
Sales Analysis is built from stock deductions, while Sales Analytics is built from closed checks. Checks that were not deducted (steps 1–5) appear only in the second report. See the FAQ in Sales Analysis.
Is it enough to block selling beyond stock on the till?
No, these are different settings. The block in the point card works on the till — it does not let you sell more than the stock. Allow negative stock on the warehouse card decides whether a check that has already been rung up is conducted when stock is short (step 4).