Skip to content

Bar tabs with a card hold — Paloma POS 2 ​

This article is about Paloma POS 2 — the new Paloma point-of-sale app. It covers bar tabs: the bartender opens a tab with the guest's card, the register places a hold on the card, items add up through the evening, and at the end the guest pays without handing over the card. If you are not sure which product you have, start with «How to tell you have Paloma POS 2».

Overview ​

  • Who it is for. Bars and restaurants with a bar, where guests order several times and pay at the end.
  • What a hold is. When the tab opens, the guest's bank reserves an amount on the card. It is not a charge: money is taken only when the tab is paid. If the guest pays another way, the hold is released.
  • Why. The guest keeps the card, and the venue is protected: if the guest walks out without paying, at least the hold amount is covered.
  • Where it works. On a register with a terminal that can place a hold: today Sunmi (TSYS) and Valor. Other terminals show no tab items.
  • The check stays ordinary. A tab is an ordinary open check at a table or a quick order. Items, the kitchen, discounts and split checks work as always.

How to turn it on ​

Settings → «Shift & operations» → «Orders» group → «Bar tabs: minimum hold».

  • Enter an amount in «Minimum hold» and save. An empty field turns bar tabs off (the row reads «Off — enter an amount to turn bar tabs on»).
  • The setting applies to the whole trade point — every till of it.
  • It helps to add a Bar table to the floor plan and turn on «Multiple checks per table» (same «Orders» group): every guest at the counter is then a separate check at that table. See «Table orders».

Open a tab ​

  1. Open the guest's check — at a table or a quick order.
  2. Tap ⋮ in the order header → «Open tab».
  3. The «Open a tab» window shows the amount: «The guest's card will be pre-authorized for …». Tell the guest the amount: it is a hold, not a charge.
  4. Tap «Read card» and ask the guest to tap, insert or swipe the card on the terminal.
  5. The register shows «Tab opened: Visa •1234, hold …». The check is saved open.

What amount is held. The larger of the two: the minimum from the setting or the check total at the moment the tab opens. Tips are not part of the hold.

Who can open a tab. An employee with the «Allow accepting payment» right — the same one a card payment needs.

If it did not work:

MessageWhat to do
«Card declined: …»Ask for another card or open an ordinary check without a tab
«The tab was not opened»The card was not presented or the operation was cancelled — there is no hold
«The terminal did not answer. Check the terminal…»Look at the terminal's journal. If the hold went through, a manager confirms it in «Tabs» (see below)
«The terminal is not available — check its connection»Check the link between the register and the terminal and try again
«A tab cannot be opened on this check»The check already has a tab, or it is neither a table check nor a quick order

«Open tab» appears only when bar tabs are on, the register has a suitable terminal and the account is ready for the function (after the server update).

Find a tab ​

  • Tables screen → the «Tabs» button (a card icon with the number of open tabs) — every tab of the point.
  • The Bar table → «Checks on …»: a check with a tab carries «Tab · Visa •1234 · hold …».
  • In the order → ⋮: the «Tabs» item names this check's tab — «Tab · Visa •1234 · hold …».

Pay a tab ​

  1. Open the tab's check and tap «Pay».
  2. Under the «Cash» and «Card» buttons, tap «Pay tab · Visa •1234» (below it — «Hold …»). No card is needed.
  3. The register charges the check from the hold. The receipt, the fiscal receipt and the after-payment tip work as for an ordinary card payment.

The check is larger than the hold.

  • Sunmi first asks the bank to add the missing amount to the hold.
  • If the bank refuses, or the terminal cannot do that (Valor), the register charges what was approved and shows «The hold covers …. Take the remaining … another way.» Take the rest in cash or with another card, as after any partial payment.
  • If the register shows «The hold does not cover the card total. Take part of the check another way first, then pay the tab.» — this happens with a card surcharge. Take part of the check another way and tap «Pay tab» again.

Pay the tab at the register with that tab's terminal. The hold lives in the terminal that placed it. On another register you see «This tab's hold is on another till's terminal — close the tab at that till». The check itself can still be paid on any register the usual way — the hold is then released (see below).

The guest paid in cash or with another card ​

Pay the check as usual. The register releases the hold on the guest's card right after the payment. If the check was paid on a register without the tab's terminal, the register with that terminal releases it — when the «Tabs» list opens or before the batch closes.

The guest's bank may still show the released hold for 1–3 business days — that is the bank's rule, not the register's.

The «Tabs» list ​

The list shows every tab of the point that may still hold money: the card or the guest's name, the hold amount and the state.

StateMeaning
«Open»The hold stands; the tab can be paid
«No answer when opening»The register got no answer from the terminal when the tab opened
«No answer when paying»The register got no answer from the terminal when the tab was paid
«Releasing…»The register sent the release
«Hold not released»The release failed

Actions:

  • «Open check» — open the tab's check to add items or pay.
  • «Release hold» — release the hold without payment. Needs the «Void Payment» right; without it the register asks for a manager PIN.
  • «It went through on the terminal» / «It did not go through» — for operations without an answer, see below.

If the terminal did not answer ​

The register never guesses whether an operation went through. Look at the terminal's journal and mark in «Tabs» what it shows:

  • «It went through on the terminal» — the operation went through (the hold stands, the payment was taken, or the hold was released);
  • «It did not go through» — the terminal has no such operation.

If the register got no answer when a tab was paid, reconcile that payment with the terminal's journal the same way as an ordinary card payment without an answer.

The guest walked out ​

There is no automation: a manager decides each such tab.

  • Charge the tab. Open the check («Open check») and tap «Pay tab» — the register charges the check, but no more than the approved hold. Close the rest the way your venue does.
  • Release the hold — if you decide not to charge.

Close tabs the same day: the bank keeps a hold only for a limited time.

Closing the shift and the batch ​

  • The batch does not close while this register's terminal carries holds: the register shows «N tabs still hold money on this till's terminal — close or release them first» with an «Open tabs list» button.
  • «Close shift (Auto)» shows the same reason on the batch step.
  • The automatic batch close skips a terminal with holds and records the reason in the skip log.
  • The shift-close wizard shows «Card holds waiting for a decision: N» with an «Open tabs list» button. An open tab, like any open check, also keeps the shift from closing (unless the point carries open checks over to the next shift).

Limitations ​

  • A tab can be opened and paid only while the terminal is connected to the bank.
  • Tabs reach every register of the point through the internet. Without the internet another register does not see the tab.
  • Only Sunmi on TSYS Sierra can add to a hold; for Amex cards and on TSYS Multipass the bank refuses, and the rest is taken another way.
  • The Classic interface has no tab items yet.