Skip to content

New Tariff Model ​

Moving to tariffs by time with revisions: converting the old tariffs to the new model and switching the model on for the whole account.

How to Access ​

Navigate to: Sidebar > Guides > Time rentals > New tariff model. In the PalomaPOS back office — Management > New tariff model.

Route: /time-pricing/model

Quick actions:

Overview ​

The move takes two steps:

  1. Converting the old tariffs. For every old tariff the server builds the first revision so that Paloma POS 2 tills price minute for minute as today. The new model stays off — the tills keep pricing the old way.
  2. Switching the new model on. Once it is on, Paloma POS 2 tills price new rentals by tariff revisions.

Only the account owner or an employee with «Full access» converts tariffs and switches the model on and off. An employee with the «Tariffs» right can view the page.

One deliberate price change ​

Today the tills do not charge time over a paid package. In a converted prepaid tariff it starts being charged — each next started block at the block price. The change takes effect only once the new model is on.

Conversion ​

  • Check — shows what each tariff becomes. The check writes nothing.
  • Convert — gives the chosen tariffs revision 1 «Converted from the old model» starting 01.01.2000 and bindings to their objects. Each tariff is converted separately: an error in one does not stop the others. A repeated conversion changes nothing for tariffs already converted.
  • Guest categories of different points are merged by name.
  • After the conversion a tariff is edited only in the new editor: the old editor shows it without the option to change it.
  • The request carries the account currency (ISO code, e.g. KZT). The page takes it from the account's payment data; if it cannot be determined — the default currency (KZT for Paloma365, USD for PalomaPOS). The code can be corrected by hand.

A tariff is not converted when:

StateWhat it means
DiscrepancyTills or points price the tariff differently (mode, «per person», tiers by guests, time-choice step, guest category prices). The page shows which tills price it how — align their settings
No itemThe tariff has no item for the check
No priceNeither the tariff nor its time bands have a price
Not converted automaticallyA prepaid tariff whose bands have other intervals
Already convertedThe tariff already has revisions

Bands without ticked days or without a price do not apply today and are not carried over — the page lists them.

Switching on ​

The new model is off by default. It cannot be switched on while any reason holds — the page names each one by point and till:

  • a Paloma365 Classic till — it prices only by the old tariffs; replace it with Paloma POS 2;
  • a Paloma POS 2 till that does not report its tariff engine level or reports a level below the needed one — update the till;
  • a tariff with object bindings that is not converted — convert it.

Tills the server cannot see ​

In a list of its own the page shows tills the server knows only from an old record and cannot check:

  • a till of the first Paloma POS version — the record stays at its register for good, even when Paloma POS 2 has long been working there;
  • a device is recorded but the till has not reported its level yet — a Paloma POS 2 install that never came online with the needed version.

These tills do not prevent switching on. If such a till still works, update it to the latest Paloma POS 2 and sign in to the account: in 10 minutes it leaves the list. If the till is gone, the confirmation names these tills when you switch on, and switching on goes through only after ticking “These tills are gone — I confirm”. A till that does still work will price rentals by the old tariffs. The server records when and which tills you confirmed — the page shows it.

Shadow pricing ​

While the model is off, Paloma POS 2 tills price every rental of a converted tariff twice: by the old tariffs (that goes on the check) and by the new model — for comparison. The server collects this comparison, and the Shadow pricing block shows for every converted tariff:

  • how many rentals were compared and over how many days;
  • how many rentals the new model priced differently (mismatches);
  • how much starts being charged — the charge for time over a paid package on the same rentals. It is an expected change, not a mismatch; the total is shown on a line of its own.

The rentals counted are those of the tariff revision the tills compare against now: if you fixed the tariff after a mismatch, the comparison starts over.

To switch the model on without confirmation, every converted tariff needs at least 7 days and 20 rentals of comparison and not a single mismatch. With too little comparison or with mismatches you can still switch on: the confirmation names the tariffs and the risk, and switching on goes through only after ticking “I understand the risk…”. The server records who switched the model on despite the shadow pricing and when — the block shows it.

The reasons of the first list (Classic tills, Paloma POS 2 tills without the needed level, tariffs not converted) cannot be overridden by a confirmation.

After switching on:

  • time over a paid package starts being charged;
  • rentals started before switching on close by the old model;
  • tariffs created in the new model are started only by Paloma POS 2 tills of the needed level.

The model can be switched off at any time — the server never refuses. New rentals are priced by the old tariffs again (the server kept their copy all along); rentals started while the model was on finish by it. Tariffs created in the new model cannot be started after switching off — the old tills do not see them.

Fields ​

FieldDescription
CurrencyISO code of the account currency for the conversion
Tariff statusCan be converted, Converted, Already converted, Discrepancy, No item, No price, Not converted automatically
The tills price it nowPer minute, prepaid packages or by intervals
Bands not carried overBands without days or without a price
Bound objectsHow many objects the tariff gets after the conversion
Model stateOn (since the first switch-on date) or off
Needed levelThe highest engine level the revisions in effect and scheduled need
Tills of the accountEvery till and its state
Shadow pricingPer converted tariff: rentals, days, mismatches, what starts being charged, result (Matches, Mismatches found, Not enough data)
Starts being chargedThe charge for time over a paid package on the compared rentals — all tariffs

Step-by-Step Guide ​

Convert the tariffs ​

  1. Check the currency and press Check.
  2. Sort out the tariffs marked «Discrepancy», «No item», «No price»: fix the till settings or the tariff in the old editor and check again.
  3. Tick the tariffs and press Convert the selected or Convert all suitable.
  4. Confirm the conversion.

Switch the new model on ​

  1. Make sure Switching the new model on shows no reasons. If it does — clear them and press Check again.
  2. Look at the Shadow pricing block: every tariff shows “Matches”. “Not enough data” — wait for 7 days and 20 rentals; “Mismatches found” — check the tariff terms.
  3. Press Switch the new model on, read the warning and confirm. If the shadow pricing is not complete, tick “I understand the risk…” and press Switch on despite the shadow. If there are tills the server cannot see and they are gone, tick “These tills are gone — I confirm”.

Switch the new model off ​

  1. Press Switch off and confirm.

Tips ​

  • Convert the tariffs early: while the model is off, the conversion changes no price at the tills.
  • Before switching the model on, tell the guests that time over a paid package will be charged.

FAQ ​

Q: Will prices change after the conversion? ​

A: No. The model stays off, the tills price the old way. Once it is on, one thing changes: time over a paid package starts being charged.

Q: The «Switch on» button is unavailable. Why? ​

A: Something prevents switching on: Classic tills, Paloma POS 2 tills without the needed level, tariffs not converted. They are listed on the page with a hint what to do. First-version tills and devices that have not reported their level do not prevent it: if they are gone, confirm it in the switch-on dialog.

Q: «Tills the server cannot see» lists a till we replaced long ago. How do I remove it? ​

A: You cannot: the server cannot tell a long-replaced first-version till from a working one, so the record stays. When you switch the model on, tick “These tills are gone — I confirm”, and it no longer holds the switch back.

Q: Why is «Starts being charged» not a mismatch? ​

A: It is the charge for time over a paid package: the tills do not take it today, and after switching on the guest pays for that time. It is an intended change, so it is shown apart and does not hold the switch back.

Q: Shadow pricing shows «Not enough data», but I need to switch on now. Can I? ​

A: Yes: in the confirmation tick “I understand the risk…” and press Switch on despite the shadow. Prices of such tariffs are not checked on real rentals — check the first checks after switching on.

Q: Why does the page say «Owner or «Full access» only»? ​

A: The conversion and the switch change how money is computed on every till of the account, so only the owner or an employee with «Full access» does them.